B&W TS20053B 2", 2-5/16" Dual Ball Pintle Tow & Stow | Universal

Features:

• Dual ball, 2-inch and 2-5/16-inch
• Built-in pintle hook
• 21,000 lb gross trailer weight with 2-5/16" ball
• 2,100 lb tongue weight rating
• Fits 2.5-inch receivers
• 6.5-inch drop and 4-inch rise
• Height adjusts by pulling two stainless pins
• Rotate ball assembly to swap ball sizes
• Stows under vehicle, away from shins and garage door
• Anti-theft design locks arm in most receivers
• Two-layer e-coat and black powder coat finish
• Built in Kansas with limited lifetime warranty

Run The Jobsite Trailer All Week And The Boat Trailer On Saturday With The Same Hitch

If your week is a jobsite trailer and your weekend is a boat ramp, you do not want a hitch that only does one of those jobs well. The B&W Tow and Stow Dual Ball Pintle handles both from a single 2.5 inch receiver mount. You get a 2 inch ball and a 2 5/16 inch ball, plus a built in pintle hook for the heavy stuff, and you swap between them by rotating the ball assembly. B&W rates the 2 5/16 inch setup at 21,000 pounds of gross trailer weight, which is serious capacity for a ball mount that stows away. To match the height of your trailer, you pull two stainless steel pins, move the hitch to the right spot, and drop them back in. When the trailer is unhooked, you rotate the hitch under the vehicle so it stays out of the way of your shins and the garage door. If theft worries you, B&W says the anti theft design keeps the adjustable arm from being removed once you lock the hitch in most receivers. For a truck that works hard all week and tows for fun on weekends, this one hitch covers a lot of ground.

Twenty One Thousand Pounds, SAE J-684 Testing, And Two Layers Of Finish Built Into One Mount

The B&W TS20053B is a Tow and Stow dual ball pintle hitch with a 2.5 inch shank, designed for 2.5 inch receivers. It has a 6.5 inch drop and a 4 inch rise, and it comes with a 2 inch and a 2 5/16 inch ball. With the 2 5/16 inch ball, B&W rates it for 21,000 pounds of gross trailer weight and 2,100 pounds of vertical tongue weight, and B&W rates the 2 inch ball for 10,000 pounds and 1,000 pounds. B&W tests all Tow and Stow hitches for strength and endurance to SAE J-684, the latest standard for bumper pulled hitches. The steel is high strength and American made, and the finish is two layers, an e coat followed by a black powder coat. The adjustment pins are stainless steel, and rotating the ball assembly swaps the ball size. B&W builds and assembles the hitch completely in Humboldt, Kansas, and backs it with a limited lifetime warranty. Pintle Tow and Stow models will not clear MultiPro or MultiFlex tailgates.

Fitment: Universal, fits 2.5" receivers, 2.5" shank

Notes:

• Pintle Tow and Stow models will not clear MultiPro or MultiFlex tailgates, confirm your tailgate before ordering
• 2.5" shank, for 2.5" receivers
• 6.5" drop and 4" rise, measure your coupler height to confirm the hitch can reach it
• Ratings: 21,000 lb gross trailer weight and 2,100 lb vertical tongue weight with the 2-5/16" ball, 10,000 lb and 1,000 lb with the 2" ball, the pintle function is for use with the 2-5/16" ball only
• Both your vehicle and your trailer ratings matter, always confirm your vehicle's towing capacity, the hitch rating is not the vehicle rating
• Tested to SAE J-684 for strength and endurance
• Anti-theft design, once the hitch is locked in most receivers, the adjustable arm cannot be removed
• Retailer listings recommend at least 11" of clearance between the ground and the lowest point of the hitch to avoid steep driveways and curbs
• E-coat and black powder coat finish with stainless steel adjustment pins, made in Humboldt, Kansas
• Covered by B&W's limited lifetime warranty, ships in 1 box
• California Proposition 65 warning applies to this product