{"product_id":"cognito-110-p0780-7-in-standard-lift-kit-11-19-silverado-sierra-2500hd-3500hd-stabilitrak","title":"Cognito 110-P0780 7\" inch Standard Lift Kit | 2011-2019 GM Silverado\/Sierra 2500HD\/3500HD","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides 7\" inches of front lift\u003c\/li\u003e\n\u003cli\u003e4-inch rear lift for a leveled stance\u003c\/li\u003e\n\u003cli\u003eIncludes Fox 2.0 monotube shocks\u003c\/li\u003e\n\u003cli\u003eImproves ride quality on and off road\u003c\/li\u003e\n\u003cli\u003eCorrects CV joint angles for better handling\u003c\/li\u003e\n\u003cli\u003eNon-torsion bar drop design\u003c\/li\u003e\n\u003cli\u003eIncludes stainless steel extended brake lines\u003c\/li\u003e\n\u003cli\u003eHandles up to 35x12.5 inch tires\u003c\/li\u003e\n\u003cli\u003eCompatible with 10-inch wide wheels\u003c\/li\u003e\n\u003cli\u003e12-hour estimated install time\u003c\/li\u003e\n\u003cli\u003eEngineered and made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eA Clean Lift That Gives Your HD Truck The Right Attitude\u003c\/h4\u003e\n\u003cp\u003eIf you want your Silverado or Sierra HD to sit tall without turning it into a rough riding chore to drive, the Cognito 7-Inch Standard Lift Kit is a solid choice. This kit delivers a bold stance that instantly changes the look of your truck while keeping the ride comfortable enough for daily use. With clearance for up to 35-inch tires, your truck gains the aggressive presence most HD owners are after. The included Fox 2.0 monotube shocks smooth out broken pavement and dirt roads, so the lift feels controlled instead of stiff. Cognito’s non-torsion bar drop design helps your truck ride better than typical tall lifts that sacrifice geometry. Stainless steel brake lines are included, which is one less thing to worry about during installation. It is a complete kit built for drivers who want reliable performance without unnecessary complexity.\u003c\/p\u003e\n\u003ch4\u003eProven Geometry And Quality Components Built To Work Together\u003c\/h4\u003e\n\u003cp\u003eThe Cognito 110-P0780 Standard Lift Kit is engineered for 2011-2019 GM Silverado and Sierra 2500HD and 3500HD trucks in both 2WD and 4WD configurations. The front lift provides 7 inches of height while maintaining proper CV joint angles through a non-torsion bar drop design. In the rear, 4-inch cast steel blocks and heavy-duty U-bolts level the truck while retaining factory leaf springs for load stability. Fox 2.0 Performance Series monotube shocks use race-proven valving to deliver predictable damping and consistent ride quality on varied terrain. Extended stainless steel brake lines are included to support the added suspension travel safely. The system is designed to maintain adequate droop travel, which helps protect suspension components and improve long-term ride quality. This kit supports 35x12.5 tires on 10-inch wide wheels with proper backspacing and installs in approximately twelve hours. All major components are engineered, manufactured, and assembled in the USA for dependable fit and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Fitment: \u003c\/strong\u003e2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 GM Silverado\/Sierra 2500HD\/3500HD\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is for 2011-2019 Silverado and Sierra 2500HD\/3500HD models, 2WD and 4WD.\u003c\/li\u003e\n\u003cli\u003eIncludes all required components for a full 7-inch front and 4-inch rear lift.\u003c\/li\u003e\n\u003cli\u003eNon-torsion bar drop design improves ground clearance and ride quality.\u003c\/li\u003e\n\u003cli\u003eAllows fitment of up to 35x12.5 tires with correct wheel specs.\u003c\/li\u003e\n\u003cli\u003eRequires wheels with 10-inch width, -12mm offset, and 5-inch backspacing.\u003c\/li\u003e\n\u003cli\u003eFox 2.0 monotube shocks included for front and rear damping.\u003c\/li\u003e\n\u003cli\u003eExtended stainless steel brake lines are included for added safety.\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in the USA for superior build quality.\u003c\/li\u003e\n\u003cli\u003eDIY installation time is estimated at around 12 hours.\u003c\/li\u003e\n\u003cli\u003eIdeal for daily drivers that need lift without losing comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Cognito","offers":[{"title":"Default Title","offer_id":68060789571857,"sku":"COG-110-P0780","price":4477.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/0477\/1089\/files\/110-P0780_0.jpg?v=1794725800","url":"https:\/\/gautoparts.com\/products\/cognito-110-p0780-7-in-standard-lift-kit-11-19-silverado-sierra-2500hd-3500hd-stabilitrak","provider":"Guaranteed Auto Parts","version":"1.0","type":"link"}