Skip to content

Edge Products 23710-3 EZX Module & Insight CTS3 Kit

SKU EDG-23710-3
Original price $1,189.95 - Original price $1,189.95
Original price
$1,189.95
$1,189.95 - $1,189.95
Current price $1,189.95
Ships Directly From The Manufacturer
GAP has the Edge Products 23710-3 EZX Module & Insight CTS3 Kit that is an outstanding upgrade for your 2020-2022 GM Silverado/Sierra 1500 3.0L Duramax LM2. The EZX is an excellent plug-and-play performance enhancement for your GM 1500 series truck powered by the 3.0L Duramax. This module allows total control over the diesel engine in your Silverado or Sierra by allowing you to adjust power levels on the fly through the steering wheel. You'll love the driving experience offered by the EZX module thanks to peak gains of 47HP and 91 Ft-Lbs. of torque and the ability to tune pedal sensitivity to your liking. Simple inline piggyback installation means the EZX requires no ECM unlocking or flashing, making it simple to remove without a trace when going in for dealer services.

The Edge EZX Module can enhance fuel economy and towing performance and has customizable feature controls through the CTS3 monitor or Edge Product's free smartphone app. Designed and engineered by diesel enthusiasts for diesel enthusiasts this inline module is ideal for daily driver and pulling applications, and offers safe, emissions-friendly performance. By tapping into the MAF, MAP, and FRP sensors the engineers at Edge developed safe horsepower gains that keep your emissions system running trouble-free! No change in regen frequency was observed under normal driving conditions but better throttle response, quicker turbo spool-up, and mileage improvements across the board were seen.

Download the free smartphone app for your Android and IOS phone to get more adjustability from your truck with the ability to calibrate for larger tire size and gear ratio swaps. The app also has 7 different throttle pedal sensitivity levels, which you can modify and save in every power level. Other features such as Engine Auto Start/Stop can be inactivated, manually adjust engine idle speed, and TPMS thresholds can be adjusted along with your factory speed limiter! The EZX app and the CTS3 Monitor also allow you to read and delete trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle when needed. A vehicle-specific A-pillar display mount is included with the Edge Products 23710-3 EZX Module & Insight CTS3 Kit for factory fit and finish.

Features:
  • Check & Clear DTCs
  • Adjust Top Speed Limiter
  • Command Manual Regen
  • Auto Start Stop Enable/Disable
  • Adjust TPMS Warning Thresholds
  • Check Emissions Readiness Monitors
  • Read & Clear ECM/TCM Diagnostic Codes
  • Max Gains Of +47HP and 91Ft-Lbs Torque
  • Gear Ratio Calibration From 2.00 to 6.00:1
  • Tire Size Speedo Calibration From 29" to 50"
  • Top Speed Limiter Adjust From 82 to 124 MPH
  • On-The-Fly Power Adjust Through Steering Wheel Controls
  • 5 Power Levels Adjustable On-The-Fly Through Steering Wheel Controls
  • Tire Pressure Monitoring Sensors Pressure Threshold Adjust From 20 to 99 PSI
  • Insight CTS3 Offers You The Visibility To Know What's Going On Under The Hood
  • Includes Vehicle-Specific A-Pillar Mount For Sleek OE Styling & Ideal CTS3 Positioning
  • Eliminate Throttle Lag With 7 User-Adjustable Throttle Booster Settings In Each Power Level
  • Engine High Idle Adjustable Through Steering Wheel Controls When In Park From 800 to 2000 RPMs
  • Engine Coolant Protection Means Module Adds No Power Until 120-Degree ECT, Backs Down Power At 240-Degrees ECT
Power Levels:
Level 1 - 10HP/13TQ
Level 2 - 15HP/40TQ
Level 3 - 19HP/49TQ
Level 4 - 25HP/54TQ
Level 5 - 27HP/76TQ
Shipping Restrictions Apply shipping restriction icon This product can not be shipped to these states/provinces: CA

Note: Does not support 2022.5+ Refresh, 2021+ SUV or LZ0 models.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)