Skip to content
ICON 77832P 2.5 VS Remote Reservoir Ext Travel Shock Absorber (Pair)

ICON 77832P 2.5 VS Remote Reservoir Ext Travel Shock Absorber (Pair)

by Icon Vehicle Dynamics
SKU ICO-77832P
$1,094.95 - $1,094.95
$1,094.95
$1,094.95 - $1,094.95
$1,094.95
Product Availability
  • Ships Directly From The Manufacturer
    Ships From Manufacturer
Get the Icon 77832P 2.5 VS Remote Reservoir Ext Travel Shock Absorber (Pair) from GAP for your 2011-2019 GM Silverado/Sierra 2500HD/3500HD 4WD (Front Lifted 0-2") today. Icon Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all Icon shock absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% re-valvable. For piggyback and specific remote reservoir applications, Icon's unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal "Bump Zone" that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom-outs and controls the suspension when compressing at high velocity. If you are looking for a more user-defined tune, consider looking into the Compression Damping Control Valve (CDCV) shocks.

Features:
  • Icon's Internal "Bump Zone" Increases Damping By 20% To Provide More Control As The Shock Approaches Full Compression
  • Remote Reservoir Design Improves Heat Dissipation To Reduce Shock Fade During Prolonged Use
  • Premium Grade 5WT Shock Oil For Consistent Suspension Damping Along A Wide Temperature Range
  • Nitrogen-Charged Monotube Design With Remote Reservoir
  • One Piece Digressive Piston Design With Vehicle-Specific Valving For Unsurpassed Performance And Ride Quality On And Off-Road
  • 7/8" Diameter Induction Hardened, Chrome-Plated Shock Shaft
  • Polyurethane Bushings And Forged Steel Mounting Stems For OE Factory-Type Fitment
  • PTFE-Lined Spherical Bearings And Application-Specific Mounting Hardware
  • 6061 Aircraft-Grade Aluminum CNC Machined Components
  • One-Piece Impact Extruded Aluminum Cylinders Offer Excellent Corrosion Resistance And A Consistent Finish
  • 100% Rebuildable
  • 100% Re-Valvable
  • All Icon 2.5 Series Piggyback And Remote Reservoir Shocks Can Be Upgraded To Icon's Compression Damping Control Valve (CDCV)



Notes:
Tech Note: Aftermarket Upper Control Arms With High-Angle Ball Joints Are Required For The Install

Note: Aftermarket upper control arms with high angle ball joint required for install

Installation Manuals:
I77832P Installation Manual