Skip to content
ICON K22105 2.5" Stage 5 Suspension System With Billet Links

ICON K22105 2.5" Stage 5 Suspension System With Billet Links

by Icon Vehicle Dynamics
SKU ICO-K22105
$4,763.30 - $4,763.30
$4,763.30
$4,763.30 - $4,763.30
$4,763.30
Product Availability
  • Ships Directly From The Manufacturer
    Ships From Manufacturer
The Icon K22105 2.5" Stage 5 Suspension System With Billet Links from GAP for the 2020-2022 Jeep Gladiator JT is the ideal setup for significantly improving off-road performance and overall ride quality for the application that will see frequent moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5" lift dual-rate front coil springs, tubular steel fixed lower and adjustable upper front links, billet front sway bar links, a triple-rate rear coil spring kit, billet aluminum adjustable upper and lower rear links, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35" tire. For those looking to run a 37" tire this can be achieved with the Icon Jeep JT Bump Stop Spacer Kit (Part #22071).

Features:
  • 2.5" Lift Height
  • Fits 35" Tires (37" With Extended Bump Stop Spacer Kit)
  • 33% Front, 23% Rear Increase In Wheel Travel
  • Improves On And Off-Road Ride Quality Over Stock
  • Front Upper And Lower Links Included For Caster Angle Correction And Improved Front End Articulation
  • Rear Billet Upper And Lower Links Improve Rear End Articulation And Allow For On-Vehicle Pinion Angle Adjustment
  • Dual Rate Front Coil Springs With Lifetime Guarantee Against Sagging/Breakage
  • Triple Rate Rear Coil Springs With Icon-Engineered Droop, Ride, And Overload Rates
  • 2.0 Aluminum Series Shocks With Vehicle Specific Valving
  • Front And Rear Track Bars Ensure Proper Alignment And Improved Articulation
  • Adjustable, Billet Aluminum Front Sway Bar Links
  • 100% Bolt-On System Makes For An Easy Install
  • "Icon 1K" Tested Under Rigorous Off-Road Conditions To Validate Tune, Performance, Strength, And Durability



Notes:
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 4.5" Backspace / -6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit PN: 22071)
Application Note #127: Will Not Fit Gladiator Mojave Trim
Application Note #150: Shocks Are Fully Serviceable
Tech Note: Icon's Advertised Lift Heights Are Based Around A Typical Jeep Jt Build Which Usually Includes Added Weight Of Accessories Such As Heavier Front Bumper/Winch. Lift Heights May Be Higher Than Advertised If Installed On A Stock Weighted Vehicle.
Tech Note: Diesel Models Will Net Approx. 1.75" Of Front Lift Over Stock Due To Their Heavier Weight.