Synergy 8525-00 Heavy-Duty Steering Kit
by Synergy
SKU SYN-XDK196
Original price
$1,000.00
-
Original price
$1,000.00
Original price
$1,000.00
$1,000.00
-
$1,000.00
Current price
$1,000.00
Ships Directly From The Manufacturer
The Synergy 8525-00 Heavy-Duty Steering Kit is a larger and stronger, bolt-on replacement for the stock steering in your Dodge Ram 2500/3500 4WD. This kit uses the updated factory T-style steering design to eliminate toe-change caused by Y-style steering. Using the factory T-style steering design also results in no induced bump steer inherent with most aftermarket crossover steering kits. The tie rods also use a single plane low misalignment tie rod end to prevent unwanted tie rod "flop" which results in a dead spot in the steering when changing direction. The complete kit includes a heavy duty Drag Link, heavy duty Tie Rod, and Steering Stabilizer Mount Kit for use with stock or aftermarket steering stabilizers using a 1/2" mounting bolt. In addition, no drilling or reaming of the knuckles is required.
Features:
- Drag Link Is Made From 1-1/2" X .250 Wall DOM
- Strongest Dodge Drag Link And Tie Rod On The Market
- Provides 2" Of Additional Ground Clearance From Stock Tie Rod
- Tie Rod Is Bent Similar To The Factory Bar To Clear Sway Bar Mounts.
- Fabricated Clamp To Retain Factory Or Aftermarket Stabilizer With 1/2" Mounting Bolt
- 100% Bolt On Components Assures An Easy, Trouble Free Installation With The Use Of Basic Hand Tools
- Steering Components Feature An Abrasion-Resistant Powder Coat Finish For Maximum Durability And Corrosion Resistance
- Tie Rod Is Made From 1-1/2" X .188 Wall 4130 Chromoly And Heat Treated For Maximum Strength - 200% Stronger Than Stock Tie Rod
- Synergy Double Adjuster Sleeve & Pinch Bolt Assembly: Allows Adjustment Of Drag Link And Tie Rod Length Without Removing It From The Vehicle
- Metal On Metal Synergy Tie Rod Ends, With Larger Than Stock, Heat Treated Chromoly Ball Studs And Shorter Shank For Greater Strength, Longevity, And Connectivity To The Road
- Drag Link Is Bent To Clear Factory Axle Brackets And Is Compatible From Stock To 4" Lifted Vehicles. (Vehicles Over 4" Of Lift Will Require A Drop Pitman Arm For Compatibility)
Kit Includes:
(1) Synergy HD Drag Link
(1) Synergy HD Tie Rod
Note:
For 2003-2008 trucks using the stock pitman arm, switching to the Mopar pitman arm for 08.5+ trucks is recommended if not already equipped. Mopar P/N: 68039930AA
2013 Dodge Ram 3500's were a split year for production. The early model trucks use the T-style steering (drag link is attached to the Tie Rod), Synergy Part # 8525-01. The late model trucks use cross over steering (Drag link is attached to the knuckle and does not attach to the Tie Rod), Synergy Part # 8725-01. Please check what style you have before ordering.
Synergy cannot guarantee fitment with aftermarket differential covers. Known compatibility with the following diff covers: aFe Power
Synergy High Performance Grease recommended (4119) to be used with all Tie Rod Ends.
Synergy Premium Copper Infused Anti-Seize (4118) to be used with all threaded components.
Recommended Steering Stabilizers: 6401-01 (Synergy Tuned IFP), 6402-03 (Through Shaft), and 6403-03 (Adjustable Through Shaft).