Synergy 8875-01 Heavy-Duty Adjustable Front Track Bar
by Synergy
SKU SYN-8875-01
Original price
$330.00
-
Original price
$330.00
Original price
$330.00
$330.00
-
$330.00
Current price
$330.00
The Synergy 8875-01 Heavy-Duty Adjustable Front Track Bar from GAP is ideal for your lifted 2018-2023 Jeep Wrangler JL or 2020-2023 Jeep Gladiator JT Lifted 0-4". Adjustable track bars serve the purpose of centering axles while running a suspension lift. This track bar enhances lateral stiffness beyond stock levels, and is viewed as an essential upgrade to prevent the factory track bar from causing steering shimmy or death wobble, even on stock vehicles. The bar is considerably stronger than the stock variant, capable of withstanding the rigors of large tires and aggressive off-road driving. On-vehicle length adjustment makes customization a hassle-free process. The bar uses maintenance-free Synergy Dual Durometer Bushings on both ends. It is bent to avoid interference with the Synergy Sector Shaft Brace and most aftermarket differential covers. Pairing it with Synergy's Drag Link, Tie Rod, and Sector Shaft Brace will ensure bullet-proofing of steering and guarantee product compatibility from stock height to 3 plus inches of lift.
Features:
- Eliminates The Track Bar From Contributing To Steering Shimmy Or Death Wobble
- Allows Centering Of Front Axle When Running A Suspension Lift
- Adjustable Without Removing From Vehicle
- Maintenance Free, No Greasing Required
- Synergy Dual Durometer Bushings Eliminate Binding Issues Associated With Stock Vulcanized Bushings
- No Jam Nuts That Are Impossible To Keep Tight
- No Modifications Required To Install
- Isolates Noise, Vibration, And Harshness (NVH) Increasing Ride Quality
- Compatible With Synergy HD Steering And Sector Shaft Brace
- Bent To Clear Most Aftermarket Differential Covers
Note: Compatible from 0-4 inches of lift in the stock mounting locations with no bump stop spacing required. Front track bar relocation bracket and high steer are recommended for lifts 3 inches and over and require 3 inches of bump stop spacing.
The replacement adjustable joint is 4812-01 and the replacement bushings are 4327-01.
Min/max lengths: 33.75 / 34.50 inches.